Catalog
BB100 ECONOMY PACK - The Buster Blaster 100 is the only true Soda Blaster. It operates using a patented, self-cleaning venturi that requires little or no maintenance. A properly adjusted Buster Blaster soda blaster will reduce your use of soda by 20% and still have better on-the-job performance than any modified Sand Blaster.
BB100 CONTRACTOR PACK - This unit is identical to the Economy Pak with the exception of the accessories and the fan coolers are sized to use a larger #5 blast nozzle. The flow of air and soda is increased when using a nozzle with a larger opening. When you order the Buster Blaster 100 soda blaster you should already have a high-volume air compressor.
BUSTER BLASTER 100 MOBILE DIESEL UNIT - The Buster Blaster 100 Mobile Unit is the Ultimate Soda Blasting product. It is our own patented, custom designed system that will give you the very best soda blasting results period. Designed from the bottom up for soda blasting only, our system will complete more trouble-free work in less time using less soda.
THE BUSTER BLASTER 100 ELECTRIC VALVE, IS A 12 VOLT POWERED VALVE WHICH STARTS AND STOPS THE FLOW OF SODA THROUGH THE BLAST POT. THIS UNIT COMES WITH:
- (1) 50’ BLAST HOSE
- (1) 55’ ELECTRIC TRIGGER
- (1) DRY BLAST NOZZLE
- FILL FUNNEL W/SCREEN
THE BUSTER BLASTER 100 PINCH VALVE IS A PNUMATIC POWERED VALVE WHICH PINCHES THE BLAST HOSE TO STOP AND START THE FLOW OF SODA. THIS UNIT COMES WITH:
- (1) 50’ BLAST HOSE
- (1) 50’ TWIN AIR LINES (FROM VALVE TO TRIGGER)
- (1) PINCH VALVE TRIGGER
- (1) DRY BLAST NOZZLE
- FILL FUNNEL W/SCREEN
SWTCS IS THE TWIN FAN COOLER AND MOISTURE SEPARATOR PACKAGE THAT INCLUDES:
- (1) 15’ HIGH TEMP HOSE
- (2) 10’ JUMPER HOSES
SWSCS IS THE SINGLE FAN COOLER AND SEPARATOR UNIT THAT INCLUDES:
- (1) 15’ HIGH TEMP HOSE
- (2) 10’ JUMPER HOSES
SWTC IS THE TWIN FAN COOLER UNIT (375 CFM) THAT COMES WITH:
- (2) 10’ JUMPER HOSES
SWSC IS THE SINGLE FAN COOLER (180 CFM) THAT COMES WITH:
- (2) 10’ JUMPER HOSES
AVA - ACTUATOR VALVE ASSEMBLY
PV - PINCH VALVE
QCVA - QUICK CHANGE VALVE ASSEMBLY
AV - ACTUATOR VALVE ONLY
HV - HUMPHRY VALVE
RHTA - 12 V TRIGGER ASSEMBLY, 55'
TAE - 12 V TRIGGER EXT. CORD, 55'
PVT - PINCH VALVE TRIGGER
BNH - BLAST NOZZLE HOLDER (1)
DBN - DRY BLAST NOZZLE
SWFN - FAN NOZZLE
SSWN - WATER INJECTION NOZZLE
FNE - 14" FAN NOZZLE EXTENSION
WNL - 12" WET NOZZLE WATER LINE
BH50 - 50' BLAST HOSE W/NOZZLE HOLDER OR TWIN CHICAGO COUPLERS
15JH - 15' HIGH TEMP JUMPER HOSE
10JH - 10' JUMPER HOSE
PVTH - PINCH VALVE TRIGGER HOSE (TWIN LINE)
PVE - 18" PINCH VALVE EXTENSION HOSE
AVAL - ACTUATOR VALVE AIR LINE
SH-6/SH-9 - STAINLESS FLEX HOSE
SWMS - MOISTURE SEPARATOR
CFR - COOLER FAN REPLACEMENT
PVB - PINCH VALVE BRACKET
BHC - BLAST HOSE COUPLER
THC - THREADED HOSE COUPLER
SWV - SODAWORKS VENTURI
FG - FLANGE GASKET
FCG - FILL CAP GASKET
PTOR - PASS THRU O-RING
VOR - VENTURI O-RING
PA - PNEUMATIC ACTUATOR
PS - POWER SOLENOID
RTRK - TRIGGER REBUILD KIT
AVRK - ACTUATOR VALVE REPAIR KIT
BPFC - BLAST POT FILL CAP
FCHD - FILL CAP HOLD DOWN
SWF&S - FILL FUNNEL AND SCREEN
SWVB - VALVE BRACKET
SBAK - POT ADJUSTMENT KNOB
